Painting tips

5 Signs Your Deck Needs Washing and Staining

Gray boards, water that soaks in, splinters and mildew: how to tell your Michigan deck needs cleaning and fresh stain.

Michigan decks go through snow load, freeze-thaw, spring rain and full summer sun every year. Stain is what keeps water out of the wood. Here is how to tell yours has worn through.

1. Water soaks in instead of beading

Sprinkle water on a few boards. If it darkens the wood within a minute instead of beading up, the sealer is gone.

2. The wood has turned gray

Gray means UV has broken down the wood surface fibers. Washing and a fresh stain restores color and slows further damage.

3. Splinters and raised grain

Rough, splintery boards are drying out and checking. Light sanding after washing, then stain, makes them comfortable again.

4. Green or black spots

Mildew and algae hold moisture against the wood. They need to be cleaned off before any new coating.

5. Peeling old stain

Film-forming stains eventually peel. The loose material must be removed, or the new coat will peel with it.

What a proper job includes

Gentle power washing, full drying time, sanding, flagging any damaged boards for repair before staining, and an even application of penetrating stain or sealer matched to the wood's age.

Rather have it done for you? See our deck staining & power washing service in Battle Creek and the Kalamazoo area.

Free estimate

Get a free written estimate

Tell us about your project. We'll set up an on-site estimate and send a clear written quote within 48 hours*. 5% off for military and municipal employees.

*48-hour turnaround applies to residential estimates only.